Makita LCT203W Compact Lithium Ion Impact Driver
For DIY enthusiasts and contractors alike, there are circumstances when your power tool’s weight and size is more important than its power output. While using a heavy-duty mains-powered drill driver, or impact driver, means that there is zero downtime and ample torque available, there are other restrictions. It is difficult to hold a heavy, powerful impact driver or drill in the correct position for long periods of time. Your arm suffers from fatigue and you end up working slower. Using cordless, compact power tools for the job is a good solution. The Makita LCT203W 10.8-Volt Compact Lithium-Ion Combo Kit contains a compact, lightweight impact driver and a driver drill with similar design specs. Both tools are powerful enough to handle most of the fastening and drilling tasks you need to undertake. Their light weight and small size, make them perfect for working in remote, cramped areas, without the need for extension cords or even torches.
The Makita LCT203W 10.8-Volt Compact Lithium-Ion Combo Kit is a two-speed driver drill. It has a maximum torque of 200 lbs/in and built-in LED’s. The driver drill is small, less than 7 inches long and weighs under 2 pounds. That means it is capable of small to medium tasks and using it will definitely not tire you out. It is powered by a small Makita-built electric motor, which runs off a very small 10.8 Volt Lithium-Ion battery pack. The battery recharges in 50 minutes, from an Energy Star rated charger. The driver drill has a ¼ inch hex shank and has maximum drill size of 3/8 inch for steel, and 13/16 inch for wood. The speed settings are 0 to 350 RPM for low and 0 to 1,300 RPM for high. The set’s other component is the Makita TD090DWZ impact driver. It has an electric motor capable of delivering 800 in.lbs of torque and 0 to 3,000 impacts per minute. The impact driver is small, at just over 6 inches long and weighs just under 2 pounds. It has a ¼ inch hex shank and an ergonomic grip. Both tools in the set have built-in LED’s. The impact driver also has a compact 10.8 Volt Lithium-Ion battery pack.
We have found the best price for the Makita LCT203W Compact Lithium Ion Impact Driver at Amazon – click here to check it out.
Makita LCT203W Compact Lithium Ion Impact Driver Features and Specifications
- Both tools have ¼ inch hex shanks
- Driver drill can take 3/8 inch for steel and 13/16 inch for wood
- Both tools have 10.8 Volt Lithium-Ion batteries, which recharge in 50 minutes
- Energy Star compliant charger included
- Both tools have built-in LED’s
- Impact driver has 800 in.lbs of torque, with 3,000 IPM
- Driver drill has two speeds: 0 to 350 RPM and 0 to 1,300 RPM
- Driver drill has maximum torque of 200 in.lbs
- Both tools weigh just under 2 pounds
- Both tools are compact: impact driver is just over 6″ long and driver drill is just under 7″ long
Makita LCT203W Compact Lithium Ion Impact Driver Reviews
An Amazon customer said that the tools compared favorably to other tools that were powered by 12 Volt and 18 Volt batteries. He liked that he could easily fit them into a normal jacket pocket or small tool belt pouch.
Another person was impressed with the battery life of the driver drill and noted that the impact driver could handle fairly heavy-duty work, with minimal performance issues.
We have found the best price for the Makita LCT203W Compact Lithium Ion Impact Driver at Amazon – click here to check it out.
